 |
 |
|
A suck down is done over the 3/32 x 16mm pins |
The completed radiographic stint with 3/32 x 10mm
pins in place |
 |
 |
|
A combination pin |
The pin is placed in the original hole that was drilled |
 |
 |
|
The pin is sealed into place with wax |
Another suck down with 2mm clear tray material is
to be done, but prior to doing the suck down paint the supporting
teeth with a coat of rubber sep |
 |
 |
|
The 2mm thick suck down is finished with drill sleeves
in place |
A 2.2mm drill sleeve |
 |
 |
|
A 2.8mm drill sleeve |
The 3.5mm drill is the last drill for the 4.1mm implant using
the 2mm suck down as the drill guide |